volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Throttle Position Sensor > < Procedures|Page 17589
Page 4
background image

Install

-

new throttle body with new gasket. Tighten with 10 Nm

-

the intake manifold between the air cleaner (ACL) and the throttle body (TB) and the connected hoses

-

the intake pipe between the front cover plate and the air cleaner (ACL)

-

the cable to the battery negative terminal.

Ordering software

Order applicable software.

Finishing

Check that no diagnostic trouble codes have been stored during the repair.
Test drive the car and check that the engine function is OK.

Throttle Position Sensor > < Procedures|Page 17589