V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Place paper between the fan shroud and the engine block.
Place the electronic throttle module (ETM) on the paper.
Warning!
DO NOT submerge throttle unit in cleaning solvent. ONLY use cleaning solvent recommended in this TNN.
Important!
Do not scrape or use a rotary wire brush to clean the unit.
Clean the ETM bore using cleaner (P/N 11 61 828) and a soft bristle brush.
Ensure that all the residue is removed from the shaded surfaces shown in the illustration.
Carefully wipe the inside of the bore clean on both sides of the throttle disc. Wipe clean the edge of the throttle disc.
Do not use compressed air to dry the throttle module.
