V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Lift out the hose for the expansion tank from the holders on top of the fan shroud. Remove both the screws holding the fan shroud.
Carefully lift up the engine cooling fan (FC).
Loosen the hose clamp for the charge air pipe on the electronic throttle module (ETM). Remove the charge air pipe from the electronic throttle module
(ETM).
Remove the 4 x screws for the electronic throttle module (ETM).
Cleaning the electronic throttle module (ETM)
Raise the electronic throttle module (ETM) and place it between the radiator and the intake manifold.
Place paper under the electronic throttle module (ETM).
Clean the throttle and bore as follows.
Note!
Do not use compressed air when cleaning the electronic throttle module (ETM).
Cleaning the ETM
Warning!
DO NOT submerge throttle unit in cleaning solvent. ONLY use cleaning solvent recommended in this TNN.
Important!
Do not scrape or use a rotary wire brush to clean the unit.
Clean the ETM bore using cleaner (P/N 11 61 828) and a soft bristle brush.
