V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Loosen the hose clamp of the charge air pipe on the electronic throttle module (ETM). Remove the charge air pipe from the electronic throttle module
(ETM).
Caution!
Do not cut the electrical cable to the electronic throttle module (ETM). It may be necessary to return the electronic throttle module (ETM) assembly.
If the electric cable of the electronic throttle module (ETM) is behind the starter motor bracket:
Slacken the two nuts. Remove the bolt. Remove any cable ties and unplug the electronic throttle module (ETM) connector. Pull the electrical cable of the
electronic throttle module (ETM) forward from the back of the starter motor bracket.
Remove the 4 x screws for the electronic throttle module (ETM).
Installing the electronic throttle module (ETM)
Install:
-
the new electronic throttle module (ETM) with new gasket
