V70 2.4 L5-2.4L VIN 61 B5244S (2001)
If the electric cable of the electronic throttle module (ETM) is behind the starter motor bracket:
Slacken the two nuts. Remove the bolt.
Remove any cable ties and unplug the electronic throttle module (ETM) connector. Pull the electrical cable for the electronic throttle module (ETM)
forward from in back of the starter motor bracket.
Remove the 4 electronic throttle module (ETM) screws.
Installing the electronic throttle module (ETM)
Install:
-
the new electronic throttle module (ETM) with new gasket
-
the 4 bolts until they make contact.
