V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
power steering hoses and coolant hoses from their holders/clips). Remove the tie strap for the power steering hose by the suspension turret.
-
the coolant expansion tank and the power steering reservoir from the mounting on the spring strut turret
-
the connector and place the reservoirs on the engine.
Place the power steering pump up on the engine.
Removing the alternator
Remove:
-
the upper screw for the alternator
-
the screws common to the alternator and compressor.
Loosen the lower screws for the compressor (so that there is some clearance).
Position the alternator so that it rests against the radiator and on the air conditioning (A/C) compressor.
Loosen the hose clamp for the charge air pipe on the electronic throttle module (ETM). Remove the charge air pipe from the electronic throttle module
(ETM).
Remove:
-
the air duct for the air cleaner (ACL) housing.
-
the four screws holding the engine cooling fan's shroud.
Move the shroud to one side, pull up the relay holder and pull the connectors for the fan apart.
