V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
fan shroud with its 4 x screws
-
the holder for the connector before installing the lower screw on the fan shroud's (car's) left side. Tighten both the lower screws. Thread the 2 x
uppermost screws
-
the fan connectors
-
the engine cooling fan's relay in the holder
-
the canister purge (CP) valve to the fan shroud
-
the connector with holder, fan shroud's right side
-
the tie strap around the wiring
-
hoses and wiring in their holders/clips the charge air hose to the charge air cooler (CAC)
-
the relay holder. Tighten the upper screws.
Installing the charge air pipe
Install the charge air pipe to the electronic throttle module (ETM)
Tighten the hose clamp for the charge air pipe on the electronic throttle module (ETM).
Installing the power steering pump
Install:
-
the power steering pump
-
the three screws. Tighten to 24 Nm
