V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Remove the intake manifold to the air filter housing.
Detach both connectors of the electric cooling fan.
Remove:
-
EVAP valve to electric cooling fan from fan cowling
-
the four cable ties holding the cable harness in place at the fan cowling.
Note!
Some cars have three cable ties and a clip to hold the cable harness in place at the fan cowling.
Lift the expansion tank hoses out of the holes at the top edge of the fan cowling. Remove both bolts holding the fan cowling in place.
Carefully raise the electric cooling fan.
Removing the electronic throttle module (ETM)
