V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
the relay holder and tighten the upper bolts.
Installing the charge air pipe
Install the charge air pipe to the electronic throttle module (ETM).
Tighten the hose clamp of the charge air pipe on the electronic throttle module (ETM).
Install:
-
dip stick guide tube
-
the intake manifold between the front and air filter housing.
Turn the ignition key to position 2. Connect the battery cable to the negative battery terminal.
Ordering and downloading software
Note!
After ETM reload the ECM must be upgraded.
Order and download software for ETM reload and ECM gasoline upgrade.
Finishing work
Check that no diagnostic trouble codes were stored in the control module during repair work.
Test drive the car and check the functionality of the engine.
Remove:
