volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Electronic Brake Control Module: Service and Repair
Brake Control Module (BCM), Replacing

Control module (ABS), replacing

Preparation

Disconnect the battery lead

 Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.

Preparations for replacement

Note! There is no need to download software when replacing the ABS control module.

Remove the air cleaner (ACL) housing

 Brake pipe master cylinder / ABS unit, replacing See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and Repair/Brake Pipe
Master Cylinder / ABS Unit, Replacing.

Remove the integrated relay / fusebox. Remove the connector for the ABS unit 

 Brake pipe from hydraulic unit / front wheel / junction, replacing  See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and
Repair/Brake Pipe From Hydraulic Unit / Front Wheel / Junction, Replacing.

Removal

Remove the control module

Remove:

-

the pump motor connector

-

the four screws. Use a 6 mm torx external socket.

Carefully lift the control module.

Check the control module

Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Service and Repair > Brake Control Module (BCM), Replacing

< PREV PAGE NEXT PAGE >