V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Tape the fuel pump's fuel lines/electrical wiring to the plastic pipe.
Pull the wiring out of the hole for the level sensor. Remove the plastic pipe and the tape. Check that there is no tape/adhesive residue on the wiring.
Pull the wiring forwards and backwards to check that it has not bent or got trapped.
Finishing
-
Install the sensor, backrest, side cushion and seat cushion. See Draining the fuel tank See: Powertrain Management/Fuel Delivery and Air
Induction/Service and Repair.
Replacing the Fuel Pump / Level Sensor For the Right-Hand Fuel Tank
Replacing the fuel pump / level sensor for the right-hand fuel tank
Special tools:
999 5720 Wrench See: Tools and Equipment/999 5720 Wrench
Removal
Removing the rear seat
Remove:
-
the backrest. See Backrest See: Body and Frame/Seats/Seat Back/Service and Repair/Backrest.
Draining the fuel system and fuel tank
Drain:
-
the fuel system. See the relevant service procedure.
Removing the level sensor / pump