volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 61
background image

Note! The relay holders can be connected and several locks may need to be adjusted at the same time.

At the same time pull the cable carefully backwards.

Alternatively use tool 951 2852 Terminal removal tool See: Tools and Equipment/951 2852 Terminal Removal Tool as illustrated.

Installation

Primary lock

Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.

Secondary lock

Slide back the secondary lock.

Finishing work

Install the relays.

Note! Take care with the positioning.

Reinstall the central relay box.

Connector Holder

Connector holder

Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Intake Air Temperature Sensor > Component Information > Diagrams > Diagram Information and Instructions > Page 3096

< PREV PAGE NEXT PAGE >