V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Slacken off the nut. Remove the cable
-
Remove the 3 screws
-
Lift the solenoid. Unhook the solenoid and the spring and hook.
Installation
Starter motor and solenoid
Install in reverse order.
To install the air cleaner (ACL) housing, see Brake pipe master cylinder / ABS unit, replacing, B5254T2 See: Brakes and Traction Control/Hydraulic
System/Brake Hose/Line/Service and Repair/Brake Pipe Master Cylinder / ABS Unit, Replacing.
For the tightening torques, see below.
Caution! When removing and installing the battery leads, see Battery, disconnecting See: Battery/Service and Repair/Procedures/Battery,
Disconnecting.
-
The screw for the bracket for the starter motor 6 Nm.
The starter motor bracket is withdrawn during the 2002 model year
-
The screws securing the starter motor to the transmission: 40 Nm.
