V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Install the engine block heater (if applicable) on the left front mounting for the sub-frame
-
Install the four screws in the sub-frame together with the subframe brackets. Use new screws. Lubricate the screws
-
First tighten the screws on the left side of the sub-frame. Tighten to 105 Nm. Angle-tighten to 120 degrees. Then tighten the righthand side to the
same value
-
Finally tighten the screws for the brackets on both sides to 50 Nm.
Finishing
