V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Install
-
Adjust the position of the wheel spindle and spring strut. See Wheel knuckle / spring strut, calibrating See: Front Steering Knuckle/Service and
Repair/Procedures. Tighten to 105 Nm. Angle-tighten 90°. Use a bevel protractor 951 2050 BEVEL PROTRACTOR See: Tools and
Equipment/951 2050 Bevel Protractor.
-
the anti-roll bar link to the spring strut. Use a new nut. Tighten to 50 Nm. Counterhold with a Torx wrench so that the boot is not damaged
-
the ABS sensor cable
-
ABS sensor onto the wheel spindle. Tighten the ABS sensor. Tighten to 10 Nm.
Note! Ensure that the sensor seat in the wheel spindle is completely clean. Clean the ABS sensor with a soft brush.
