volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 24042 > < Procedures|Page 24040
Page 29
background image

Install:

-

the spring strut

-

the 2 x M10 screws for the spring seat.

Note! The lower end of the spring must be turned in towards the center of the car. This applies to both sides.

For vehicles equipped with Four-C
Install the cable harness for the shock absorbers on the sub-frame.
The connector on top of the sub-frame.

Installing the shock absorber

Procedures|Page 24042 > < Procedures|Page 24040