V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Install the trailing arm on the bodywork locating pin.
Install trailing arm bracket screws finger tight.
Use new screws.
Tighten screws:
A. First tighten the screw through the rear axle link bracket. Tighten to 105 Nm (77.44 ft. lbs.). Angle-tighten to 90°
B. Then tighten the three bracket screws to 65 Nm (47.9 ft. lbs.) and angle- tighten 60°
C. Finally tighten the nut on the trailing arm-rear axle link screw to 65 Nm (47.9 ft. lbs.) and angle tighten 120°. Use bevel protractor 951 2050.
Install:
-
brake pipe to mounting clip.
-
sound damper bracket screw.