V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Remove:
-
the connector from the transmission
-
the tie strap holding the cable harness.
Separate the connectors.
Disconnect the small connector from the bracket.
Note! Only applies when replacing the control system.
Set the transmission lever to position N. Shift the lever as far forward as possible to position P and then back two steps to position N.
Remove:
-
the tie-straps around the connector rubber seal and cable harness
-
the rubber seal.
Insert a screwdriver between the casing and the socket.
Press in the catch and at the same time slide out the sockets from the casing.
Remove the oil temperature sensor and solenoid sockets from the others.
