V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Reinstall the control system cover on the transmission. Tighten according to applicable specifications.
Hint: Diagonally install 2 x 30 mm studs, correctly aligned in the cover.
Pull the cable up to the oil temperature sensor.
Install:
-
the oil pipe to the transmission. Use a new O-ring
-
the return line for the control system cover
-
the cable harness for the holder on the cover.
Finishing
Installing components
Remove the spacer.
Position 998 5972 JACK See: Tools and Equipment/998 5972 Jack under the left-hand side of the sub-frame.
Press the frame up against the car body. Install 2 x M14 new screws to the sub-frame. Lubricate the threads. Tighten according to applicable
specifications. Install the support plate screws at the same time.
Right-hand side:
