volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Control System, Replacing|Page 18861 > < Automatic Transmission Solenoids|Page 18858
Page 1
background image

Shift Solenoid: Service and Repair
Control System, Replacing

Control system, replacing

Special tools:

999 5716 Reading off tool See: Tools and Equipment/999 5716 Reading Off Tool 
999 5460 Lifting hook  See: Tools and Equipment/999 5460 Lifting Hook 
998 5972 JACK  See: Tools and Equipment/998 5972 Jack 
999 5972 FIXTURE  See: Tools and Equipment/999 5972 Fixture 
999 5477 JOINT WEDGE  See: Tools and Equipment/999 5477 Joint Wedge 

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information is always correct.

Preparatory work

Engine wash

Wash the engine.
Use compressed air to blow clean around the control system cover.

Transmission fluid, draining

Warning! The fluid will be extremely hot if the vehicle has recently been driven. Avoid skin contact.

Remove:

-

the protective cover under the engine

-

the oil plug. Drain the fluid from the transmission.

Install the oil plug. Use a new gasket.
Tighten the plug according to applicable specfications.

Flushing the transmission

Control System, Replacing|Page 18861 > < Automatic Transmission Solenoids|Page 18858