V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Allow the car to cool. This will make the cover easier to remove, as it tends to get stuck if the transmission is hot. Also, this will allow you to do some
adaptation while the transmission is still cold.
Remove the LF wheel and the splash pan for access.
Cleaning:
Clean the area so that no foreign material will enter the transmission (This view is from below the car).
Removal:
Install a bolt (M10X80, PN 968808) in the transmission case as shown.Using a heavy screwdriver or prybar, push on the cover a few times. This will
loosen up the cover and make the snap-ring easier to remove.
Remove the snap-ring.
