volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Pinion Seal Bevel Gear, Replacing|Page 19053 > < Pinion Seal Bevel Gear, Replacing|Page 19051
Page 2
background image

Lubricate the torque converter throat with ATF oil.

Note! Take care not to damage the oil pump during installation.

Make sure torque converter is as far into the transmission as possible. Check with a ruler. The distance between the cover and retaining tabs must be 
approximately 14 mm.

Installing the transmission

Install the transmission.

Pinion Seal Bevel Gear, Replacing|Page 19053 > < Pinion Seal Bevel Gear, Replacing|Page 19051