volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Boot, Gear Selector, Replacing|Page 19212 > < Boot, Gear Selector, Replacing|Page 19210
Page 37
background image

Solenoid Back-Up (Reverse) Inhibitor, Replacing

Solenoid back-up (reverse) inhibitor, replacing

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.

Removal

Preparations

S60R (B5254T4 engine)

Remove the center console. See Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console,
Replacing.

S60 (other engines)

Remove the center console. See Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console,
Replacing (-2004) or Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console, Replacing
(2005-).

Disconnect the top panel from the gear selector assembly stop.
Disconnect the mechanical cable from the gear selector assembly.

Boot, Gear Selector, Replacing|Page 19212 > < Boot, Gear Selector, Replacing|Page 19210