V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Tighten to 10 Nm. Thread the rubber seal onto the pipe with the boot turned towards the clutch cylinder. Remove the protective plug. Install the
junction. Always use a new quick-release connector with a rubber seal. Lubricate the rubber seal using a drop of brake fluid. Press the locking bracket
into the junction. Press the junction into the pipe
Installing the rubber seal for the pipe in the clutch cover
Ensure that the rubber seal locates all the way around.
Note: To install the transmission, see Manual Transmission/Transaxle, Service and Repair.