V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Remove the nut holding the control arm. Use a Torx wrench as a counterhold.
Warning: Ensure that the tension strap is correctly secured in the control arms.
-
Pull down the control arm (1) using the tension strap (2)
-
Release the spring strut from the control arm.
Removing the drive shaft
-
Remove the drive shaft. Knock the drive shaft out using a brass drift. Hang the drive shaft as illustrated
-
Secure the spring strut in position
-
Remove the 4 screws for the hub.
Installation