V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Shifter M/T: Removal and Replacement
Gear Selector Lever Knob, Replacing
Gear selector lever knob
Gear selector lever knob
-
Pry off the rear edge of the gear selector lever cover together with the boot until the two clips release. Use a plastic weatherstrip tool. Remove the
gear selector lever cover and the boot
-
Then pull the panel up until the four clips at the sides release.
-
Lift the boot up over the gear selector lever to access the locking sleeve
-
Press in the two catches on the locking sleeve. Pull the locking sleeve downwards.
