volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Removal and Replacement|Page 17984 > < Removal and Replacement|Page 17982
Page 4
background image

-

Remove the two screws (4) from under the cover.

-

Disconnect the door panel. First slide the panel upwards and unhook the top edge.

-

Remove the connectors (1) on the door control module.

-

Pull the door opener handle (3). Remove the mechanical cable (2) on the reverse. First pry up the locking lugs.

-

Remove the door panel.

Applies to the driver's door:

-

Remove the screw (1).

-

Remove the door control module cable from the two clamps (2).

-

Remove the cable connector from the treble loudspeaker (3).

-

Press in the two catches (4) on each side of the door control module. Remove the module.

Illustration 4A - D applies to the passenger door: A

-

Remove the panel by the power window button. First carefully pry off the panel using a weatherstrip tool.

B

Removal and Replacement|Page 17984 > < Removal and Replacement|Page 17982