volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Cargo Net, Floor|Page 18503 > < Cargo Net, Floor|Page 18501
Page 2
background image

-

Install the four elastic straps at the corners of the protective cover around the mounting lugs in the cargo compartment as illustrated.

-

Spread the protective cover out over the reverse of the rear backrests.

-

Insert the front rigid edge of the protective cover completely under the rear backrest panel. If necessary, use a small screwdriver or a weatherstrip
tool to pry the panel up.

-

If necessary laterally adjust the protective cover.

-

Open the rear folding side panel in the cargo compartment.

-

Install the rear corner of the protective cover on the upper section of the folding panel.

-

Ensure that the protective cover does not block the opening mechanism for the panel.

-

Fold the panel back into position. Secure the panel.

-

Repeat the operation on the other side.

-

Remove the backing from all the Velcro strips on the inside of the protective cover.

Cargo Net, Floor|Page 18503 > < Cargo Net, Floor|Page 18501