V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Illustration A
At activation the seat back moves first mainly backward in upright position, whereby the body is secured in a balanced way. The distance of this parallel
movement is approximately 50 mm (1.97 in).
At activation, the indicator pin (26) shears off.
Illustration B
Instead of the occupant now being thrown forward, as in a traditional seat, the backrest now begins to angle backwards (up to 15 degrees). This is
achieved using a deformation element (a link with set deformation qualities, 24) which collapses and therefore gently brakes movement (absorbs energy
during the crash sequence). The compression limited springs distributes force evenly throughout the entire spine to avoid pressure points which often
previously resulted in S-curvatures to the spine.
Because lesser collisions from the rear may also activate the system, a repair kit has bee produced. The WHIPS repair kit consists of:
-
Deformation elements (x 2).
-
Indicator pins (x 2).
-
Return springs (x 2).
-
Link washer (x 2).
-
Pivot bushing (x 2).
-
Pivot shaft with nut (x 2).
-
Notched washer.
