volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Airbag Module Seat (SIPS), Replacing|Page 14979 > < Airbag Module Seat (SIPS), Replacing|Page 14977
Page 12
background image

NOTE:  Ensure that no bits of paper remain.

-

Install screws 2 and 8.
(4 and 5 are installed when installing the grab handles)

-

Hook on the inflatable curtain module. Install screw 3.

NOTE:  It is very important that the hook is correctly installed.

-

Install clip G.
(6 and 7 are installed when installing the grab handles)
Tighten screws 1-7.
Tighten to 10 Nm.

-

Install the connector

-

Install the headlining.

CAUTION:  When replacing the inflatable curtain module, part of the decal on the curtain must be torn off and stuck on the decal in the door
opening.

SIPS (Side Impact Protection System) Module, Replacing

SIPS (side Impact Protection System ) Module, Replacing

Removal

Preparations

-

Disconnect the battery lead.

Front seat SIPS (side impact protection system ) module

-

Remove the SIPS-bag.

Installation

Front seat SIPS (side impact protection system ) module

-

In reverse order.

SIPS Airbag

SIPS Airbag 

Replacing SIPS bag 

Remove: 

-

the seat from the car

-

the lumbar support adjustment.

Airbag Module Seat (SIPS), Replacing|Page 14979 > < Airbag Module Seat (SIPS), Replacing|Page 14977