V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Remove:
-
Remove the side door panel
-
the run-off profile
-
the three screws
-
the wiring.
Angle and work out the side impact protection block.
Install:
In reverse order.
SRS Connector
SRS Connector
Removing the SIPS bag control module connector
NOTE:
-
Take care when separating the connectors.
If the connector breaks the whole cable harness must be replaced.
-
Always replace the clip if it has been removed.
