V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Installing the spring strut
Install the spring strut in the bodywork using the new nuts. Tighten to 25 Nm.
-
Install the spring strut on the wheel spindle. Use new screws and new nuts
-
Adjust the spring strut and wheel spindle to the measured value.
Note: Ensure that measurement is performed at same points as when removing.
Tighten to 105 Nm. Angle-tighten 90°. Use bevel protractor 951 2050.
