V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Installing the hub
-
Install the hub. Use new screws
-
Tighten crosswise to 20 Nm
-
Then tighten to 65 Nm
-
Angle-tighten 60°. Use bevel protractor 951 2050.
Turn in the spring strut and position the drive shaft in the hub.
Note: Check that the seal is not worn or damaged.
Installing the drive shaft
-
Install the screw loosely on the drive shaft. Use a new screw