V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Use: Adhesive, part no. 116 1370
Installing the snap ring and connecting socket
Install:
-
the circlip for the socket
-
the sleeve in gearbox with the long splined section (2) toward the gearbox.
Use a rubber mallet to knock in the sleeve.
Finishing
See Bevel gear, replacing See: Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement/Automatic Transmission
Components/Bevel Gear, Replacing.
Sealing Ring Drive Shaft/Differential, Replacing
Sealing ring drive shaft/differential, replacing
Special tools:
999 5768 Puller See: Tools and Equipment/999 5768 Puller
999 5769 Pilot See: Tools and Equipment/999 5769 Pilot
999 5770 Drift See: Tools and Equipment/999 5770 Drift
999 5771 Drift See: Tools and Equipment/999 5771 Drift
Left-hand side
Preparatory work
Remove the drive shaft. See Drive shaft left, replacing, B5244T5, M66 See: Axle Shaft Assembly/Service and Repair/Drive Shaft Left, Replacing.
Remove the splash guard under the engine.
Removing the differential seals, left-hand side
