V70 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
Door Module: Service and Repair
Passenger Door Module (PDM), Replacing
Passenger door module (PDM), replacing
Preparations
CAUTION: New software can only be ordered after the control module has been installed in the car. VIDA reads off the new control module identity
which is required to order the correct software.
Always check that the control module and control module box connectors do not have bent or damaged terminals or sockets. This may have been the
cause of the fault.
Removing the passenger door module (PDM)
Ignition off.
Remove:
-
the door panel.
-
the nut and screw holding the control module in place
-
the connectors.
Grasp the underneath of the control module. Press upwards. Carefully pull the control module from the lower catches.