V70 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
Note! For tightening torques, see: Tightening torque See: Engine, Cooling and Exhaust/Engine/Specifications/Tightening Torque.
Replacing the electronic throttle module (ETM)
Caution! Ensure that the surfaces between the throttle body (TB) and the intake manifold are clean.
Install a new electronic throttle module (ETM). Use a new gasket. Tighten the 4 screws.
Installing components
Install the charge air pipe between the electronic throttle module (ETM) and the charge air cooler (CAC).
Note! Heat the pipe at the connections to facilitate installation.
Install the intake pipe between the front cover plate and the air cleaner (ACL) housing.
Finishing
After replacing the electronic throttle module (ETM), the electronic throttle module (ETM) must be adapted using the vehicle communication input:
"Adaptation of the electronic throttle unit"
