V70 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Installing the timing belt
-
Tighten the center screw on the belt tensioner. Tighten to 5 Nm.
-
Turn the variable valve timing unit clockwise to the stop.
-
Hold it secure in the limit position.
Install the belt in the following order:
-
crankshaft
-
the idler pulley
-
intake cam
-
exhaust cam
-
water pump
-
belt tensioner.
NOTE: Adjust the timing gear pulleys so that the screws are not at a limit position in the oval holes. Also check that the markings correspond.
Tensioning the timing belt
-
This adjustment is always carried out on a cold engine. A suitable temperature is approximately 20 degree C.
-
At higher temperatures (with the engine at operating temperature or a high outside temperature for example) the indicator is further to the right.