V70 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Install the retaining strap and pull down the control arms so that the shock absorber can be installed.
Install:
-
the shock absorber
-
the screws. Tighten to 80 Nm.
Remove the tensioner strap.
Finishing
Install the wheel. See Installing wheels See: Wheels and Tires/Wheels/Service and Repair.
Check/adjust the wheel alignment. See: Wheel alignment, checking / adjusting See: Alignment/Service and Repair.
Bushing Outer Control Arm Lower, Replacing
Bushing outer control arm lower, replacing
Special tools:
951 2923 Hydraulic hole cylinder See: Tools and Equipment/951 2923 Hydraulic Hole Cylinder
999 7034 Connecting rod M12X400 See: Tools and Equipment/999 7034 Connecting Rod M12X400
999 7035 Sleeve See: Tools and Equipment/999 7035 Sleeve
999 7044 Sleeve See: Tools and Equipment/999 7044 Sleeve
999 7045 Drift See: Tools and Equipment/999 7045 Drift
999 7046 Drift See: Tools and Equipment/999 7046 Drift
999 7054 Adapter incl. 2x MC6C M6X12 See: Tools and Equipment/999 7054 Adapter Incl. 2X MC6C M6X12
Preparations
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Preparations
-
Remove the wheel.
Removal
