V70 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Install:
-
the gear selector assembly to the bodywork. Tighten to 25 Nm
-
the cable to the gear selector. Secure the cable with the catch
-
cable on the gear selector nose
-
the key lock cable to the gear selector assembly. Place the cable in the extracted locking sleeve.
Installing the gear selector assembly stop
Install the gear selector assembly stop.
Installing the top panel on the gear selector assembly
Install the top panel.
Installing gear selector knob
Install the gear selector knob.
Initial setting of the key lock cable (adjusting)