V70 AWD L5-2.5L Turbo VIN 56 B5254T (2000)
Door Lock Cylinder: Service and Repair
BA. Front And Rear Doors
Replacing Lock Cylinder
BA1. Handle
Remove 2 Torx 30 handle screws (A).
Slacken off Torx 30 lock screws (B).
Press in the lock while removing the handle.
BA2. Lock Cylinder
Lift the lock facing.
Push out lock cylinder from the back. The key is not required to do this.
CAUTION! When installing it the key should not be in the lock. If the key is in the lock the lock cylinder may be installed in the wrong position.
BA3. Adjusting Outside Handle Travel