Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Brakes and Traction Control > Antilock Brakes / Traction Control Systems > Braking Sensor/Switch > Component Information > Diagrams > Page 4896

Page 1
background image

Braking Sensor/Switch: Service and Repair

Replacing EBD pressure switch 
Preparations 

Clean around EBD pressure sensor connection to master cylinder.
Put rags under the EBD pressure sensor to protect painted surfaces against brake fluid spillage. 
Get a drain bottle and hose to collect brake fluid

Removing EBD pressure sensor

Ignition off.
Jack front end of car up.
-

Disconnect connector from EBD pressure sensor.

Remove:
-

Protective cap from bleed nipple by LH front wheel.

-

Connect hose to drain bottle.

-

Open bleed nipple, depress brake pedal and hold it down or lock it in that position.

-

Close bleed nipple.

-

Remove EBD pressure sensor and plug connector so that no dirt enters the braking system.

Check EBD pressure sensor

Brakes and Traction Control > Antilock Brakes / Traction Control Systems > Braking Sensor/Switch > Component Information > Diagrams > Page 4896

[PREV PAGE] [NEXT PAGE]