Volvo Workshop Manuals
V70 GL L5-2.4L VIN 55 B5254S (1998)
Brakes and Traction Control > Antilock Brakes / Traction Control Systems > Hydraulic Control Assembly - Antilock Brakes > Component Information > Diagrams > Page 4952
Insert vacuum hose between bracket and hydraulic unit. Check that non-return valve and rubber seals are intact and in good condition. Connect
Installing hydraulic unit continued
- Connect connector to control module and pump motor.
In cars with turbo
- Intake pipe between air filter casing and turbo.
- Bleed braking system as per AAAA. Bleeding brakes with bleeding unit. See: Brake Bleeding/Service and Repair
Clean up any brake fluid spillage with lukewarm water and car-wash shampoo.
|[PREV PAGE] [NEXT PAGE]|