Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Brakes and Traction Control > Antilock Brakes / Traction Control Systems > Wheel Speed Sensor > Component Information > Service and Repair > Front Wheel Sensor [KKKK] > Page 5004

Page 2
background image

-

Check that brake disc and rim contact surfaces are clean

-

Grease hub center guide for rim with anti-rust agent 1161038-3.

-

Install wheel.

-

Install bolts hand tight. Then tighten them in star pattern to 110 Nm (80 ft.lb). If tightening with nut runner, use torque socket 1158147.

NOTE:

Tightening bolts in star pattern to specific torque settings is important to prevent stresses in the brake disc.

[KKKKA6]

Operational checks

-

Read off any DTCs posted in control module and erase them.

-

Quit DTM by switching off ignition.

-

Test-drive car and check that ABS warning indicator goes out.

-

Read off DTCs and check that DTC 1-1-1 appears.

-

Quit DTM by switching off ignition.

Brakes and Traction Control > Antilock Brakes / Traction Control Systems > Wheel Speed Sensor > Component Information > Service and Repair > Front Wheel Sensor [KKKK] > Page 5004

[PREV PAGE] [NEXT PAGE]