Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Brakes and Traction Control > Disc Brake System > Brake Caliper > Component Information > Service and Repair > Brake Caliper, Servicing > Page 5054

Page 3
background image

- Blow ducts clean with compressed air.
- Coat cylinder lining, piston (2) and new 0-ring (4) with brake fluid.
- Install lubricated 0-ring (4) in groove in cylinder. Install dirt guard in end of piston (see illustration).

[OOOA10]

- Install dirt guard in groove inside cylinder and push piston in carefully.
- Check that dirt guard slots into its groove in the piston.
- Check that dirt guard is in position properly.
- Install bleed nipple (5), tighten to 9 Nm (7 ft lb).

[OOOA11]

Finishing

Brakes and Traction Control > Disc Brake System > Brake Caliper > Component Information > Service and Repair > Brake Caliper, Servicing > Page 5054

[PREV PAGE] [NEXT PAGE]