Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Brakes and Traction Control > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Service and Repair > Front Wheel Sensor [KKKK] > Page 5383

Page 3
background image

Thread the larger piece of heat-shrink tubing onto the new cable harness.

Cut off the two smaller pieces of heat-shrink tubing to 30 mm long. 
Thread them onto the 65 mm long, stripped cables.

Strip cable pairs 

Strip insulation on the 4 cable ends 13 mm with pliers 951 2620.

Twist cable ends 

There may be a thin plastic film residue on the white (tinned) conductor units. 
Untwist the stripped cable ends a little and twist them together again. For safety reasons, do the same with all four stripped cable ends.

Splice the same colored cable ends 

Brakes and Traction Control > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Service and Repair > Front Wheel Sensor [KKKK] > Page 5383

[PREV PAGE] [NEXT PAGE]