Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Engine, Cooling and Exhaust > Cooling System > Sensors and Switches - Cooling System > Engine - Coolant Temperature Sensor/Switch > Coolant Temperature Sensor/Switch (For Computer) > Component Information > Diagrams > Page 2331

Page 1
background image

Coolant Temperature Sensor/Switch (For Computer): Service and Repair

JA14 Replacing Engine Coolant Temperature (ECT) Sensor:

-

Drain off coolant

-

Remove thermostat housing (two TORX 40 screws). Disconnect connector.

-

Disconnect terminal pins from connector (see image) in order to thread the wiring through a ring wrench.

-

Remove temperature sensor and replace.

-

Test sensor.

Assemble in reverse order.

CAUTION:  Do not forget to top up coolant. Then run engine to normal operating temperature and check coolant level.

Engine, Cooling and Exhaust > Cooling System > Sensors and Switches - Cooling System > Engine - Coolant Temperature Sensor/Switch > Coolant Temperature Sensor/Switch (For Computer) > Component Information > Diagrams > Page 2331

[PREV PAGE] [NEXT PAGE]