Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Engine, Cooling and Exhaust > Engine > Camshaft, Lifters and Push Rods > Camshaft Gear/Sprocket > Component Information > Service and Repair > With Mechanical Adjuster > Page 1768

Page 2
background image

Mark up camshaft pulleys (intake and exhaust respectively).

Remove 

-

tensioner damping unit

-

timing belt, turn to one side.

-

camshaft pulleys, use counterhold 999 5199

Remove seal then install new camshaft seal 

Remove camshaft seal/seals
Grease and install new seal with drift 999 5449, use a copper mallet. (Drift 999 5449 of the later version is made of plastic.)

Note!

Later version sealing rings are removed with an extractor 999 5919, because of the reduced space between the camshaft and sealing ring
reinforcement.

Remove 

-

Air Cleaner (ACL) housing, with hoses

-

distributor cover, rotor, holder

-

Camshaft Position (CMP) sensor housing and damper

-

engine Cooling Fan (FC)

-

starter motor

Note!

Connectors and hoses for solenoid valve on the Air Cleaner Housing (ACL).

Install gauge 999 5451, 999 5452 

Engine, Cooling and Exhaust > Engine > Camshaft, Lifters and Push Rods > Camshaft Gear/Sprocket > Component Information > Service and Repair > With Mechanical Adjuster > Page 1768

[PREV PAGE] [NEXT PAGE]