Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Connecting Rod, Engine > Component Information > Service and Repair > Crank, Pistons and Rods, Dismantling > Page 1803

Page 2
background image

4. Remove big end bearing caps:

-

Check markings on bearing caps and connecting rods.

Mark with a number punch or die as necessary.

-

Check centering of bearing shells in connecting rods and caps.

CAUTION:
-

Do not mix up different crankshaft bearing shells.

-

Do not rotate crankshaft.

5. Lift crankshaft out of cylinder block:

-

Support crankshaft in suitable V-blocks on two outermost main journals.

-

Remove remaining main bearing shells from block.

-

Mark position of thrust bearing.

CAUTION:  Do not mix up different main bearing shells.

6. Remove pistons from block:

-

In order to overcome ring friction press pistons carefully out by hand.

-

Taking care not to scratch bores, remove pistons and connecting rods from bores.

7. Clean joint faces:

Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Connecting Rod, Engine > Component Information > Service and Repair > Crank, Pistons and Rods, Dismantling > Page 1803

[PREV PAGE] [NEXT PAGE]