Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Crankshaft, Engine > Component Information > Service and Repair > Crank, Pistons and Rods, Dismantling > Page 1839

Page 5
background image

11. Check Conrad (big end) bearing seats: 

-

Check bearing shells visually. 

-

If any doubt, measure out-of-round. 

-

Use dial gauge 999 9639, or equivalent.

Bearing seat diameter:

B 5202-5254: 53.0+0.013 mm 

Max. Out-of-round: 0.006 mm 

12. Check Conrad in alignment gauge 

-

Check for straightness and twisting.

Important:  
-

Check that clamping surface of fork is round and free of burrs.

-

Release and tighten expander at big end between each alignment check.

Connecting Rods Bushings, Replacement

13. Press bushing out:

-

Use drift tool No. 999 5309, or equivalent.

-

Use drift the right way round, with the short end downwards.

-

Use drift tool No. 999 2413, or equivalent as counterhold.

Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Crankshaft, Engine > Component Information > Service and Repair > Crank, Pistons and Rods, Dismantling > Page 1839

[PREV PAGE] [NEXT PAGE]