Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Piston, Engine > Component Information > Service and Repair > Crank, Pistons and Rods, Dismantling > Page 1881

Page 5
background image

11. Install oil pump suction pipe: 

-

Put gasket on pipe. 

-

Reconnect pipe. 

-

Tighten to 17 Nm (13 ft lb)

-

Use new oil channel seals.

12. Install oil pan: 

-

Apply liquid gasket compound part No. 1 161 059-9, or equivalent on pan with short-haired roller tool No. 951 1205, or equivalent.

NOTE:
-

Insert four bolts and align pan flush with rear face of block. 

-

Permitted tolerance = ±0.025 mm.

-

Use calipers and feeler gauges.

-

Tighten bolts from front and rear, tighten to 17 Nm (13 ft lb)

-

Install new oil filter.

Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Piston, Engine > Component Information > Service and Repair > Crank, Pistons and Rods, Dismantling > Page 1881

[PREV PAGE] [NEXT PAGE]